Drip Irrigation Tape Manufacturers by HYRT 1

Drip Irrigation Tape Manufacturers by HYRT 2

Drip Irrigation Tape Manufacturers by HYRT 3

Drip Irrigation Tape Manufacturers by HYRT 4

Drip Irrigation Tape Manufacturers by HYRT 5

Drip Irrigation Tape Manufacturers by HYRT 6

Drip Irrigation Tape Manufacturers by HYRT 7

Drip Irrigation Tape Manufacturers by HYRT

Brand Name:

HYRT

Inquiry

more products

Sprinklers

Drip Irrigation Supplies

Valves

Pipe Fittings

Filtration Equipment

Fertigation Equipment

Pipes & Tubes

Intelligent Irrigation Controllers

Tools & Accessories

Send your inquiry

Holiday

Eid holidays

Key word

drip tape

Diameter

16, 16mm

Type

Other Watering & Irrigation

Water-saving, thin-walled 2000m roll

Our HYRT drip tape delivers precise, water‑saving irrigation with factory‑molded embedded drippers at 30cm spacing and a stable 1.38–3.0 L/h flow to ensure uniform moisture across long runs. Built as a slim 16mm tape with a 0.2mm wall, anti‑clog screen, aging‑resistant material and 2000m export‑packed rolls, it combines durability and easy installation for commercial and field‑scale systems. We support OEM options, engineering technical support, rapid production and testing, plus a quality warranty and sample availability to simplify procurement and long‑term service.

Efficient 16mm Drip Tape

The HYRT 16mm drip tape features a 0.2mm wall, 30cm dripper spacing and comes in 2000m rolls, delivering 1.38–3.0 L/h flow at 50–100 kPa for consistent irrigation over long distances. Embedded, imported-mold drippers with built-in screen nets ensure uniform flow, clog resistance and long service life, reducing maintenance and improving water-use efficiency for farms and greenhouses. Its closely bonded drip heads, aging-resistant materials and support for OEM/custom designs provide durable, low-cost deployment and flexible installation options for large-scale drip irrigation projects.

HYRT 16mm Drip Tape

The HYRT 16mm drip tape has a 0.2mm wall thickness, 30cm dripper spacing and comes on a 2000m roll, providing 1.38–3.0 L/h flow at 50–100 kPa. Imported molds and high-quality materials produce embedded drippers and built-in screen nets to ensure stable, uniform flow and clog resistance over long distances. Aging-resistant construction and adjustable spacing make it a durable, efficient choice for large-scale drip irrigation installations, backed by factory testing and OEM options.

◎ Consistent Flow Rate

◎ Precision Molded Drippers

◎ Durable Scalable Supply

Efficient, Uniform, Durable, Economical

HYRT's 16mm drip tape with a 0.2mm wall and 30cm emitter spacing comes on a 2000m roll and is precision-extruded under rigorous quality control to deliver uniform emitters and long-lasting performance. As a trusted agricultural brand, HYRT leverages decades of irrigation expertise to produce drip tape that resists clogging, UV degradation, and chemical exposure while maintaining consistent flow for row crops, orchards, and greenhouses. Key advantages include simple installation, flexible layout options, excellent water-use efficiency, reduced labor and fertilizer runoff, and cost-effective coverage per hectare, making it an efficient solution for growers seeking higher yields and reliable irrigation.

Material introduction

Constructed from high-grade, aging-resistant polymer with a 16mm diameter and 0.2mm wall thickness, this drip tape combines flexibility with dimensional stability for consistent performance. Inner drippers are molded using imported tooling and premium materials, embedded into the tape and fitted with an internal screen to prevent clogging and ensure uniform flow at 30cm spacing. The robust material formulation extends service life and allows 2000m rolls to be laid over long distances while maintaining stable flow rates.

◎ Durable Aging-Resistant Polymer

◎ Precision Molded Drippers

◎ Clog-Resistant Long-Run Reliability

FAQ

What is the HYRT 16mm Drip Tape 0.2mm Wall 30cm Spacing 2000m Roll best used for?

This thin‑walled 16 mm drip tape with 30 cm emitter spacing is ideal for low‑pressure, high‑uniformity irrigation of seasonal or short‑term plantings: vegetables, strawberries, row crops, nurseries, greenhouse benches, and seasonal landscape beds. The long 2000 m roll suits large fields or many rows without frequent joints.

What pressure, filtration and water quality should I use with this drip tape?

Use a low‑pressure drip system within the manufacturer’s recommended range (commonly around 0.5–1.5 bar / 7–22 psi). Install a fine filter and periodic flushing—typically a filtration level in the 100–200 micron range is advised—to minimize clogging. Always check chemical compatibility for any fertilizers or additives before fertigation.

How should I install and position the 16 mm drip tape for best performance?

Lay the tape along each crop row so emitters are next to the root zone; use the 30 cm emitter spacing to match plant spacing. Secure with stakes or clips, avoid sharp bends or kinks, maintain gentle slopes and provide end‑caps or flush valves for system flushing. The tape can be laid on the surface under mulch or shallowly buried depending on your cultural practice.

Is this 0.2 mm wall drip tape suitable for permanent use and how long will it last?

At 0.2 mm wall thickness this tape is optimized for seasonal and short‑term use. Expect reliable performance for one or several seasons depending on UV exposure, handling and water quality. For permanent installations or long multi‑year use, consider thicker‑walled or taped designs engineered for longevity.

How do I maintain and troubleshoot this drip tape in the field?

Flush mains and laterals before startup and after shutdowns. Backflush and clean filters regularly. If emitters clog, inspect filters and consider chemical treatment or flushing. Repair small cuts or leaks with drip tape repair couplers or clamps; replace severely damaged sections. Store drained, clean rolls away from sunlight between seasons.

How does the 30 cm emitter spacing affect irrigation scheduling and crop selection?

30 cm spacing provides frequent wetting points along the row, creating a more uniform wetting pattern suited to closely spaced or shallow‑rooted crops (e.g., vegetables, strawberries, seedlings). Irrigation run time and frequency depend on emitter flow rate, soil type and crop needs—use the tape’s per‑meter application rate (from the manufacturer) together with crop evapotranspiration and soil infiltration to size run times and intervals.

Company Advantages

· Special sizes can be customized in SHANDONG HYRT AGRICULTURAL TECHNOLOGY CO., LTD..

· The high-efficiency QC team guarantees its excellent performance.

· SHANDONG HYRT AGRICULTURAL TECHNOLOGY CO., LTD. always carefully create drip irrigation tape manufacturers suitable for the market.

Company Features

· SHANDONG HYRT AGRICULTURAL TECHNOLOGY CO., LTD. has years of experience in the design and manufacture of drip irrigation tape manufacturers and is widely accepted as a professional manufacturer.

· Strong R&D of technology coupled with sound management system ensures the quality of drip irrigation tape manufacturers.

· Our company is striving hard to become the most competitive and strong supplier with global influence by making an effort in product strategy. Call!

Application of the Product

The drip irrigation tape manufacturers produced by HYRT can be used in many fields.

With a focus on Micro-sprinklers, drip emitters, sprinkler heads, drip irrigation tubing and accessories, valves, filters, fertilizer injectors, and solenoid valves., HYRT is dedicated to providing reasonable solutions for customers.

we welcome custom designs and ideas and is able to cater to the specific requirements. for more information, please visit the website or contact us directly with questions or inquiries.