Feature Highlights
Stable rotation for more consistent coverage
Let the sprinkler control distribution—not pressure variations. The HYRT ball-driven low-speed rotating sprinkler uses a sealed drive mechanism to maintain smooth rotation at low flow, producing gentle droplets across a 6–7 m radius. This helps reduce harsh impact on seedlings, flowers and foliage. The pressure-compensating version keeps flow within a narrow range from 2 to 4 bar, making it suitable for slopes, long laterals and systems with changing pressure. The non-pressure-compensating version increases output as pressure rises, allowing buyers to match performance to system conditions. For field edges, greenhouse sidewalls and roadside zones, an optional 180-degree accessory helps reduce overspray. With two operating versions and practical system-matching support, it gives growers, project contractors and irrigation distributors a flexible sprinkler solution.
Core Advantages
Ball-Driven Low-Speed Rotating Sprinkler Specifications
| Model | Version | Radius | Pressure | Flow | Spray Pattern | Dimensions |
| BDPCSP | Pressure-compensating | 6–7 m | 2 bar | 145 L/h | Full-circle rotating | 73 × 44 mm |
| BDPCSP | Pressure-compensating | 6–7 m | 2.5 bar | 150 L/h | Full-circle rotating | 73 × 44 mm |
| BDPCSP | Pressure-compensating | 6–7 m | 3 bar | 157 L/h | Full-circle rotating | 73 × 44 mm |
| BDPCSP | Pressure-compensating | 6–7 m | 3.5 bar | 155 L/h | Full-circle rotating | 73 × 44 mm |
| BDPCSP | Pressure-compensating | 6–7 m | 4 bar | 150 L/h | Full-circle rotating | 73 × 44 mm |
| BDSP | Non-pressure-compensating | 6–7 m | 1.5 bar | 130 L/h | Full-circle rotating | 73 × 44 mm |
| BDSP | Non-pressure-compensating | 6–7 m | 2 bar | 150 L/h | Full-circle rotating | 73 × 44 mm |
| BDSP | Non-pressure-compensating | 6–7 m | 2.5 bar | 170 L/h | Full-circle rotating | 73 × 44 mm |
| BDSP | Non-pressure-compensating | 6–7 m | 3 bar | 185 L/h | Full-circle rotating | 73 × 44 mm |
| BDSP | Non-pressure-compensating | 6–7 m | 3.5 bar | 200 L/h | Full-circle rotating | 73 × 44 mm |
| BDSP | Non-pressure-compensating | 6–7 m | 4 bar | 220 L/h | Full-circle rotating | 73 × 44 mm |
Optional: 180-degree spray accessory for greenhouse edges, walls, roadsides and field boundaries.
Application Fields
This sprinkler is designed for micro-irrigation projects that require gentle droplets, stable rotation and broad coverage, with pressure-compensating or non-pressure-compensating options selected according to terrain and system pressure.
Gentle spray suits seedlings, leafy greens and fruiting vegetables, while the pressure-compensating model improves uniformity on long laterals or variable-pressure lines.
Low-speed rotation reduces harsh impact on tender leaves and young plants, while the 6–7 m radius helps limit unnecessary overlap.
The pressure-compensating model supports more stable flow across elevation changes.
The optional 180-degree accessory directs water toward the planted side and reduces overspray onto roads, walls and non-crop areas.
Customized Services And Technical Support
Need a sprinkler setup matched to your terrain and pressure conditions? Shandong HYRT Water-Saving Irrigation Co., Ltd. provides model selection, spray-layout support and system-matching services.
Installation and Maintenance Guide
● Before Installation: Flush mainlines and laterals to remove sand and debris. Select the pressure-compensating or non-pressure-compensating model according to terrain, pressure and coverage needs.
● Installation: Keep the sprinkler vertical and connect the male-thread inlet securely to the matching fitting. For boundary areas, install and aim the optional 180-degree spray accessory.
● Commissioning: Start at low pressure, then gradually increase to the specified operating range. Check for stable rotation, complete coverage and secure connections.
● Maintenance: Clean the nozzle and internal passages regularly. If rotation or flow changes, check filtration, water quality and line pressure before disassembling the sprinkler for cleaning.