Professional Sprinkler

It is in the nozzle above the rocker shaft, set with a front end with a deflector plate (baffle) and guide plate rocker pressure water from the nozzle of the nozzle when sprayed, the deflector plate impact guide plate, so that the rocker arm produces tangential motion force around the cantilever rotation of an angle, and then return under the action of the torsion spring and hit the nozzle, so that the nozzle turn an angle, and so on repeatedly, the nozzle can make a full-circle rotation. If the nozzle is equipped with a limiting device and a reversing mechanism, so that the nozzle in the rotation of a certain angle after the reversal of rotation, you can carry out fan sprinkler irrigation. Suitable for fixed medium pressure sprinkler systems. Vertical pendulum sprinkler head Using the reaction force generated when the water impacts the deflector at the front of the vertical pendulum arm to make the sprinkler head rotate intermittently, the pendulum arm is rotated by the counterweight at its back end. After a certain angle of rotation of the nozzle, by the yoke roller and limiter with the drive rod to push and pull the nozzle in front of the reversing arm, so that it cuts into or out of the nozzle jet, forcing the nozzle to quickly reverse. This nozzle has the advantages of balanced forces, reliable work balance, long range, large range of flow adjustment, etc., the use of increasingly widespread. However, the required pressure is higher and the structure is more complex.

　　1. Classified by role and use;


　　(1) cut-off valve: cut-off valve is also known as closed circuit valve, stop valve, its role is;

　　(2) check valve: check valve is also known as a one-way valve or check valve, its role is;


　　(3) safety valve: the role of the safety valve class is to prevent the pipeline or device in;


　　(4) regulating valves: regulating valve category including regulating valves, throttling valves and pressure reducing valves;


　　(5) Diverter valves: diverter valves include a variety of distribution valves and traps, etc., ;


　　(6) Exhaust valves: Exhaust valves are essential auxiliary elements in piping systems;


　　2. Classified by nominal pressure;


　　(1) Types of valves


　　1. Classified by role and use


　　(1) cut-off valve: cut-off valve is also known as closed circuit valve, shut-off valve, its role is to connect or cut off the medium in the pipeline. Cut-off valve types include gate valves, globe valves, plug valves, ball valves, butterfly valves and diaphragm valves, etc.


　　(2) Check valve: check valve is also known as one-way valve or check valve, its role is to prevent the backflow of media in the pipeline. Its main role is to prevent the backflow of the medium, to prevent the pump and drive motor reversal, as well as the release of the container medium. Water pump suction off the bottom valve also belongs to the check valve category.


　　(3) Safety valves: the role of safety valves is to prevent the pipeline or device in the medium pressure exceeds the specified value, so as to achieve the purpose of safety protection.


　　(4) Regulating valves: regulating valves include regulating valves, throttling valves and pressure reducing valves, whose role is to regulate the pressure of the medium, flow and other parameters.


　　(5) Diverter valves: Diverter valves include a variety of distribution valves and traps, etc., whose role is to distribute, separate or mix the media in the pipeline.


　　(6) Exhaust valves: Exhaust valves are essential auxiliary components in piping systems and are widely used in boilers, air conditioning, oil and gas, and water supply and drainage pipelines. They are often installed at high points or elbows to remove excess gas from the pipeline, improve the efficiency of the pipeline and reduce energy consumption.


　　2. Classified by nominal pressure


　　(1) Vacuum valve: refers to the valve whose working pressure is lower than the standard atmospheric pressure.


　　(2) Low pressure valve: refers to the nominal pressure PN ≤ 1.6Mpa valve.


　　(3) Medium pressure valve: refers to the nominal pressure PN 2.5, 4.0, 6.4Mpa valve.


　　(4) High pressure valve: refers to the valve with a nominal pressure PN of 10~80Mpa.


　　(5) ultra-high pressure valve: refers to the nominal pressure PN ≥ 100Mpa valve.


　　3. classified by working temperature


　　(1) ultra-low temperature valve: for the medium working temperature t<-100 ℃ valve.


　　(2) low-temperature valve: for the medium working temperature -100 ℃ ≤ t ≤ -29 ℃ valve.


　　(3) room temperature valve: for medium working temperature -29℃


　　(4) medium temperature valve: for the medium working temperature 120 ℃ ≤ t ≤ 425 ℃ valve.


　　(5) high temperature valve: for the medium working temperature t>450℃ valve.

General purpose valves Flange-connected iron gate valves


　　GB12233-89

　　General purpose valves Iron globe valves and lift check valves


　　GB12234-89

　　General-purpose valves Gate valves of copper with flange and butt-weld connections


　　GB12235-89

　　General-purpose valves Flange-connected steel globe valves and lift check valves


　　GB12236-89

　　General valves Swing check valves made of steel


　　GB12237-89

　　General valves Ball valves made of steel with flange and butt-weld connections


　　GB12238-89

　　General-purpose valves Butterfly valves with flange and butt-weld connections


　　GB12241-89

　　Safety valves General requirements


　　GB12242-89

　　Safety valves Performance test methods


　　GB12243-89

　　Spring-loaded direct load safety valves


　　GB12244-89

　　Pressure reducing valves General requirements


　　GB12245-89

　　Pressure reducing valves Performance test methods


　　GB/T13932-92

　　General valves Iron swing check valves


　　GB/T15185-94

　　Iron and copper ball valves


　　JB309-75

　　Gate valves Parameters


　　JB311-75

　　Check valves Parameters


　　JB1761-91

　　Screw plug gaskets


　　JB/T1762-92

　　Valve structural elements Plate body size


　　JB2202-77

　　Spring loaded safety valves Parameter


　　JB2203-77

　　Spring-loaded safety valves Structure length


　　JB2205-77

　　Pressure reducing valves Structure length


　　JB2206-77

　　Pressure reducing valves Technical conditions


　　JB2311-78

　　Ball valves Technical conditions


　　JB2766-92

　　PN16.0~32.0MPA forged high pressure valves Structural length


　　JB/T5299-91

　　General-purpose valves Fluid-controlled butterfly check valves


　　JB/T5300-91

　　General-purpose valves Materials


　　JB/T6438-92

　　Plasma arc overlay welding of valve sealing surfaces Technical requirements


　　JB/T6439-92

　　Valves subject to pressure casting steel parts Magnetic particle flaw detection inspection


　　JB/T6440-92

　　Valves subject to die-cast steel parts Radiographic inspection


　　JB/T6441-92

　　Safety valves for compressors


　　JB/T6495-92

　　Valve structure elements Gate (or valve) T-slot size


　　JB/T6496-92

　　Valve structure elements Packing box dimensions


　　JB/T6497-92

　　Valve structure elements Stem end dimensions

As the concept of environmental protection becomes increasingly popular, so does the concern for the use of water resources. In order to maximise the utilisation of water resources for environmental protection, the nozzle industry has started to flourish. Compared to traditional atomising nozzles, industrial nozzle technologies such as atomising nozzles, spiral nozzles and clamping nozzles have been chosen to improve the utilisation of water resources.


With the development of industry and the acceleration of urbanisation, water shortage will become an important factor in the economic development of China. There is a broad market prospect to deal with the water shortage in China through water treatment pathways such as sewage treatment, wastewater reuse and desalination.

On September 3, the 80th anniversary of the victory of the Chinese People’s War of Resistance Against Japanese Aggression and the World Anti-Fascist War, our company organized all employees to watch the grand military parade. The impeccably aligned formations, powerful and rhythmic strides, dignified and heroic troops, and advanced sophisticated equipment filled every employee with immense pride and excitement.


This magnificent parade not only demonstrated the nation’s strong defense capabilities but also highlighted the unity, determination, and uplifting spirit of the Chinese people. Each precise formation reflected countless hours of rigorous training, and every seamless coordination embodied unwavering dedication to excellence. This pursuit of perfection and meticulousness resonates deeply with the professional values we uphold in the water-saving irrigation industry.


Just as the parade exemplified precision and coordination, our company remains committed to providing accurate and efficient irrigation solutions. Every drop of water saved is our response to the national policy of energy conservation and emissions reduction; every optimized irrigation system is our contribution to agricultural development. We understand that water-saving irrigation is not only crucial for agricultural productivity but also integral to national food security and the sustainable utilization of water resources.


Watching the parade has strengthened our determination to contribute to the advancement of national agriculture. Inspired by the spirit of the parade, we will approach our work with even greater passion and professionalism. We are dedicated to developing and producing high-quality water-saving irrigation products, providing robust support for modern agriculture, and contributing to the national cause of water conservation.


In this new era and journey, we, as water-saving irrigation professionals, will stay true to our mission, embrace hard work, and create a brighter future through relentless efforts!